If you are wondering why your toilet won’t flush, it’s likely the result of the following common problems.
Why Won’t My Toilet Flush Completely?
While it is suggested to let the professional services handle the dirty work, it may be an easy DIY fix depending on the specific issue. Let’s take a look at the common reasons why a toilet won’t flush and what you can do to fix the problem.
1. Toilet Is Clogged
A toilet clog can be quite obvious in most cases. Something as simple as too much toilet paper or feminine care products preventing01 the toilet from flushing properly. If your toilet becomes clogged frequently, though, it’s best to contact a toilet cleaning service.
To prevent clogs in the future, always be careful not to flush any waste besides toilet paper. Even “flushable” wipes should not be flushed down your toilet.
2. Damaged Flapper
The flapper is the rubber piece that opens and seals off the intake hole in order to let water into the tank. The end result is a proper flushing down the drain. However, a damaged or worn flapper can leave you with an endlessly filling toilet.
This happens because the flapper can no longer close the water intake hole to allow the tank to fill back up. Thankfully, this part is relatively inexpensive to replace.
3. Tank Is Low On Water
If the toilet will not flush and it is not clogged, the tank may not feature enough water. After each and every flush, you should hear the sound of water filling the toilet back up. If you do not hear the running sound, it could mean the valve was turned off.
If this is the case, a simple twisting of the flush valve can fix this issue. It is also possible that the float ball isn’t adjusting to your toilet’s water level. This issue calls for a professional toilet cleaning service.
4. Cracked Overflow Tube
It’s suggested to check your overflow tube if the toilet won’t flush. A cracked overflow tube can prevent the toilet’s tank from filling due to an overflow of water into the tube instead of the tank.
No water equals no flushing. Unlike the flapper, this component is more complex to replace and will require a few tools to replace it.
5. Lift Chain Is Loose Or Disconnected
The lift chain both lifts and lowers the toilet’s flapper to cover and uncover the intake hole. If the chain becomes damaged or broken, it will not be able to lift the flapper.
This means the toilet will be unable to flush properly. It is quite easy to reattach or readjust the chain if it has become disconnected or has too much flack.
Royal Restrooms Rents Portable Showers In Phoenix
Royal Restrooms of AZ offers porta potty and shower rentals through out the entire Phoenix Valley of Arizona. This includes Scottsdale, Cave Creek, Peoria, and several cities outside of Phoenix including Tucson and Flagstaff. Contact us today to get a free quote.
